Lake Charm, VIC: ATSB report finds that road traffic changes hadn’t led to action

13 Oct

The Australian Transportation Safety Board (ATSB) has reported on the Collision between a train and a truck on a level crossing near Lake Charm. The accident occurred on the McCann Road level crossing on February 12th, 2013. As a result of the collision there were minor injuries to one train passenger and to the drivers of the train and truck.  The truck’s trailer was destroyed and there was minor damage to the front of the locomotive.

The ATSB found that the truck driver’s view of the track was restricted due to the acute road-to-rail interface angle and the resulting limited opportunity to observe the train through the truck cabin’s passenger-side window.  When the truck driver stopped to look for trains, his view along the track to the north was probably no more than 220m and insufficient to observe the approaching train.

An embankment in the crossing’s northwest quadrant also affected sighting and vegetation either side of the road approach meant that the installed give-way protection was inconsistent with the available sighting distances.

In the three years prior to the incident, the risk profile of the crossing had changed significantly due to a large increase in truck movements associated with a greater demand for gypsum from the mine.  The safety interface management of the crossing by V/Line and the Gannawarra Shire did not identify this changing risk profile and did not involve consultation with a key stakeholder, the mine owner.

Since the accident, the operator of the gypsum mine has undertaken to re-align the road approaches to the crossing to address the acute road-to-rail interface angle, and to reduce the incline of the road on the approaches.

The ATSB says that his incident highlights the need for rail and road authorities to be proactive in addressing identified sighting deficiencies at level crossings and to monitor the risk profile of crossings.

The occurrence also highlights the need to involve all key stakeholders in road-rail interface safety management processes.

The full ATSB report can be found at: http://www.atsb.gov.au/publications/investigation_reports/2013/rair/ro-2013-008.aspx

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: