Tallahasse, Florida: State DOT releases report re crossings adjacent to highway junctions

7 Jan

The Florida Department of Transportation has released the final report of the “Improved Traffic Control Measures to Prevent Incorrect Turns at Highway-Rail Grade Crossings” study.

The abstract for this study reads:
“A number of injuries and fatal collisions have occurred at certain highway-rail grade crossings that are located immediately adjacent to highway intersections, driveways or interstate ramps. Some guide signage, pavement markings, and other traffic control devices present near or at the crossings in the past may have confused drivers and caused them to turn onto the railroad tracks, rather than at the nearby intersections, driveways or ramps. This research found the major contributing causes of incorrect turns onto railroad tracks includes (1) confusing signs and pavement markings near highway-rail crossings, (2) darkness and low visibility near or at highway-rail crossings, (3) following turn instructions from a GPS device onto railroad tracks, (4) skewed highway-rail grade crossings, and (5) driver distraction. Based on the findings from intensive literature review, historical crash data analysis, and field observations, a set of practical countermeasures was developed to prevent incorrect turns onto railroad tracks. The major recommended treatments for upstream of a highway-rail grade crossing include advance direction signage and striping. The recommended downstream treatments also consist of guide signs and striping. For the critical zone, treatments such as striping or dynamic envelope pavement markings, pavement gate markings, bollards, and illumination are recommended. Adequate illumination is essential for reducing the number of rail-vehicle crashes and stuck vehicle incidents due to incorrect turns at night. Finally, this research developed a simple and effective method to help quantify potential drivers that experience confusion or hesitation when they approach a highway-rail grade crossing. It provided a cost-effective method to evaluate the effectiveness of any implemented treatments to prevent incorrect turns onto railroad tracks.

The report can be accessed at: http://www.dot.state.fl.us/research-center/Completed_Proj/Summary_PTO/FDOT-BDK85-977-45-rpt.pdf

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: